History of Lathe Machine

-

Lathe Machine

Machining is one among the foremost important material removal methods within the technology of producing. It’s basically a set of fabric working processes that involves other processes like drilling, shaping, sawing, planning, reaming, and grinding among others. It is called the mother of all machine tools. Machining is practically a neighborhood of the manufacture of all metals and other materials like plastics, and wood also. A crucial machine that's useful in machining is that the lathe machine .A lathe machine is usually utilized in metalworking, metal spinning, woodturning, and glassworking. The varied operations that it can perform include the following: sanding, cutting, knurling, drilling, and deforming of tools that are employed in creating objects which have symmetry about the axis of rotation. A number of the foremost common products of the lathe machine are crankshafts, camshafts, table legs, bowls, and candlestick. The first lathe machine that was ever developed was the two-person lathe machine which was designed by the Egyptians in about 1300 BC. Primarily, there are two things that are achieved during this lathe machine set-up. The primary is that the turning of the wood working piece manually by a rope; and therefore the second is that the cutting of shapes within the wood by the utilization of a pointy tool. As civilizations progressed, there are constant modifications and improvements over the first two-person lathe machine, most significantly on the assembly of the rotation. The production of the rotation therefore evolved consistent with the subsequent procedures: the Egyptians manual turning by hand; the Romans addition of a turning bow; the introduction of the pedal within the Middle Ages; the utilization of the steam engines during the economic Revolution; the utilization of individual electric motors in the 19th and mid-20th centuries; and therefore the latest of which is that the adaption of numerically controlled mechanisms in controlling the lathe machine.


Comments

Post a Comment

Popular posts from this blog

Definition and Parts of a Vernier Caliper

-
Image
Vernier Caliper and Its Parts:   Vernier Caliper Vernier Caliper: The vernier caliper is a measuring tool wont to get precise linear dimension measurements. A vernier micrometer is particularly useful to live the diameter of cylindrical objects as its jaws can clamp either side to urge accurate measurements. Main Parts of a Vernier caliper:   1. Upper Jaws or Inside Jaws   2. Lower Jaws or Outside Jaws 3. Depth Rod   4. Main Scale 5. Vernier Scale 6. Lock Screw 7. Thumb Screw 1. Upper Jaws or Inside Jaws: The upper jaws are smaller in size and are attached to the upper portion of the vernier micrometer. Similar to the lower jaws, one of these jaws is fixed and the other is movable. The difference between them and the lower jaws is that the upper jaws are used for measuring inside dimensions of hollow objects such as inside diameters of pipes, lengths and widths of boxes etc. The jaws are placed inside the place to be measured and then opened
Read more

Lathe Machine Operations

-
Image
    Lathe Operations: 1.      Facing: It is an operation of reducing the length of the workpiece by feeding the perpendicular to the lathe axis. This operation of reducing a flat surface on the end of the workpiece. For this operation, regular turning tool or facing tool may use. The cutting edge of the tool should set to the same height as the centre of the workpiece. 2.      Turning: It is the most common type of operation in all lathe machine operations. Turning is the operation of removing the excess material from the workpiece to produce a cylindrical surface to the desired length. The job held between the centre or a chuck and rotating at a required speed. The tool moves in a longitudinal direction to give the feed towards the headstock with proper depth of cut. The surface finish is very good.    Ø Straight Turning: The workpiece is held on the chuck and it is made to rotate about the axis, and the tool is fed parallel to the lathe axis. The straight turning
Read more

Micrometer and it's main parts

-
Image
Micrometer and It's Parts:  Micrometer   Micrometer: The micrometer may be a precision measuring system, employed by engineers. Each revolution of the rachet moves the spindle face 0.5mm towards the anvil face. The object to be measured is placed between the anvil face and the spindle face. The rachet is turned clockwise until the thing is ‘trapped’ between these two surfaces and therefore the rachet makes a ‘clicking’ noise. This means that the rachet can't be tightened anymore and therefore the measurement are often read.   Main Parts of Micrometer: 1.      Main Frame 2.      Zero adjusts screw 3.      Anvil 4.      Spindle 5.      Anvil Face and Spindle Face 6.      Lock Nut 7.      Sleeve 8.      Thimble 9.      Rachet 1.      Main Frame: It’s a c shaped frame as identified within the figure, may be a rigid part that has both holding points for employment or object to be measured. Its size depends on micrometer measuring range so
Read more